Previous page Main page In the beginning of the list Map of a site Write to us Search

PULTRUSION TECHNOLOGY for the production of polymeric composite material components
PULTRUSION PROFILES
DECORATIVE-LOAD BEARING PROFILES

PULTRUSION TECHNOLOGY

for the production of polymeric composite material components (shaped and plain) A modular system with pulling device of 3,5 tons in force provided with auxiliary tooling.
A general-purpose environmentally safe technology allows the impregnation of reinforcing material with the binder, continuous filler advance, moulding with simultaneous binder polymerization, cutting (including laser cutting) of a finished profile to be carried out in one and the same process.
It is possible to manufacture all kinds of profiles (solid and lightened at the expense of a honeycomb core): with plane-parallel, triangular or round section, with several asymmetrical inner planes, tubular, stringer profiles with closed and open surfaces, with section area from 2 to 3000 mm, three- and five-layered panels with fillers for the interior and floor of transport facilities.
MATERIALS: glass, carbon and organic fibers or rovings, special-purpose quick-curing binders, pigments, fire-retardant additives, elastomers. The surface of the component can be braided (in order to increase the strength) or decorated in the process of manufacturing.

PULTRUSION PROFILES
from polymeric composite material

  • for structures of aerospace equipment
  • railway transport and underground
  • construction and automotive industries
  • sports goods
  • medical equipment




    • CHARACTERISTICSGLASS FIBER PLASTICSCFRP
    Ultimate strength, no less than, MPa
          under tension
          under compression
          under bending
    1100
    600
    1200
    1400
    900
    1400
    Elastic modulus, no less than, GPa
          under tension
          under bending
    100
    45
    120
    120
    Product length, m
    up to 100
    up to 100
    Coefficient of material use
    0,9 - 0,98
    0,9 - 0,98


    DECORATIVE-LOAD BEARING PROFILES -

    ribbed, curved and conical CFRP components with a decorative coating from carbon fabric of various colours for the structures used in motorcycles and cars: silencer shells various cover plates, etc. The use of decorative profiles:

  • eliminates the following product finishing
  • assures weight saving of no less than 30% as compared to metallic analogs
  • raises the service life of automobile units owing to the lack of corrosion of the profiles protecting these units

    • ADVANCED FIELDS OF APPLICATION: railway transport, underground, sea and river ships, building industry, sports goods, medical equipment, architecture, interiors, instrument making.

    FSUE "ORPE "Technologiya"

    For further information please contact:

    Address: FSUE "ORPE "Technologiya"
    15, Kiev St., Obninsk 249035, Kaluga region, Russia
    Phones: +7 (48439) 6 2841, +7 (495) 232 1045
    Vikulin Vladimir Vasil'evich    General Director Doctor of Technical Sciences, Professor,
    Academician of the International Academy of Ceramics and International Engineering Academy
    Phones: +7 (48439) 6 4775, +7 (495) 996 3593
    Romashin Boris Alexandrovich     Head of Department for Foreign Economic Relations
    Fax: +7 (48439) 6 4575
    Internet: http://www.technologiya.ru, http://www1.technologiya.ru
    E-mail: